Designed to put the BLING and
POP into printable fabric personalization.
– Print full color custom graphics, numbers and letters.
– Recommended for PRINT & CUT machines.
– Suitable for most dark and light colored fabrics, especially Cotton and Polyesters.
– 100% Polyurethane, with a mayonated silver base glitter flake
– 200 Microns durable, soft handle feel, flexible and comfortable.
– PRINT SMART TECHNOLOGY™: Inks dries in seconds for quick cut, mask, and transfer.
– Results™ Mask suggested.
– Multi-Layer with other films.
Ink: ECO-Solvent and Solvent Ink.
1. Print and Cut in positive mode.
2. Create Contour Cut and weed away excess film away from design.
3. Mask and then pull back at 45° degree angle from liner. Pull away from cavities.
4. Pre-heat garment 2 to 3 seconds.
5. Position transfer onto textile where needed. Cover with Kraft or Parchment paper.
6. Heat Press at Medium pressure (60 psi), at 310°F – 330°F. for 15 seconds.
7. Peel Warm.
Wash and Dry Instructions:
Machine washable at 40° degrees C. Wash inside out.
Wash in cold or lukewarm water. Do not use bleach or hard detergent.
Hang dry or use cool setting on dryer.
Do not use hot temperature to dry.
Back to Apparel Material & Supplies